LOADING IMAGES
Surface hardener for stamp
DESCRIPTION
DECOBETON, stamped surface hardener is a mixture of hydraulic binder, mineral based hard aggregates, pigments and other additives applied on fresh concrete, a ready-mixed concrete surface hardener which increases the wear and dust resistance and impact resistance of the surface.
It is produced in gray, red, green, yellow and other colors when requested. Colored DECOBETON surface hardener uses alkaline and light resistant pigments.
APPLICATION AREA
In stamping concrete applications; On pedestrian roads, on sidewalks, in park and garden concretes, in environmental regulations.
FEATURES
- Allows mold patterns to pass completely to the fresh concrete surface.
- Prepared in the desired colors.
- Provides an antique look to the surface with the powder form spreader.
- Specially designed aggregates ensure long life of the molds.
APPLICATION
Concrete is poured into the prepared ano molds at the desired code height and the mold is placed by placing the concrete. When reaching the concrete surface, 2/3 of the total amount of DECOBETON to be applied (in the form of only footprints when pressed) is discarded and the remaining 1/3 material is discarded after the dismantling process. At the end of the troweling process, CEMRELEASE PRA is sprinkled on the surface and the stamping process is done on the concrete surface. At the end of 1-2 days CEMRELEASE PRA is removed from the surface with pressurized water.
Concrete must be protected with CEMCURE AC or CEMCURE SH immediately after application. In this way, the concrete is prevented from evaporating rapidly and the concrete can be set up with its own water. Prevents the formation of capillary shrinkage cracks, it prevents absorption of concrete.
CONSUMPTION
DECOBETON consumption is 3-6 kg / m sup2;.
PACKING AND STORAGE
DECOBETON is packed in 25 kg polyethylene bags. Shelf life is 6 months when stored in protected and dry places.
| Documents |
|---|